Grizzly MTR 25 Traduction De La Notice D'utilisation Originale page 74

GB
sprays out. The work with the equip-
ment causes high temperatures on
the housing. The equipment must
therefore be allowed to cool before
filling. Otherwise, the fuel could ignite
and cause serious injuries.
• When filling with fuel, ensure that the
tank is not overfilled. If liquid misses,
this must be cleared away immedi-
ately and the equipment cleaned.
• After filling, ensure that the seal screw
is sitting properly in order to prevent
it from coming loose as a result of the
vibrations caused during the work.
• Watch out for leaks. Do not start the
engine if fuel is leaking. Risk of death
as a result of burns!
14. Usage duration and breaks. Pro-
longed use of the motorised equip-
ment can cause circulation disorders
in the hands as a result of the vibra-
tion. However, the usage duration can
be extended with suitable gloves or
regular breaks. Be aware that per-
sonal tendency to poor circulation,
low external temperatures and high
gripping forces will reduce the usage
duration when working.
15. Be aware of damaged parts. Before
initial operation and after severe im-
pacts, check the equipment for signs
of damage and wear. Are individual
parts damaged? In case of slight dam-
age ask seriously whether the tool will
nonetheless work properly and safely.
Ensure correct alignment and adjust-
ment of moving parts. Do the parts in-
terlock correctly? Are parts damaged?
Is everything correctly installed? Are
all the other requirements in place for
proper functioning? Damaged safety
devices etc must be repaired or re-
placed by authorised people if there is
no explanation otherwise in the oper-
ating instructions. Defective switches
74
All manuals and user guides at all-guides.com
must be replaced by an authorised
body. If repairs are required, please
contact a customer service centre au-
thorised by us.
16. Always switch off the engine before
undertaking adjustments or mainte-
nance work. This particularly applies
for work on the cutting head.
17. Use only authorised parts. In case
of maintenance and repair, use only
identical spare parts. Contact the
Grizzly service centre for spare parts.
Warning! The use of other mowing
heads as well as accessories and
attachments that are not explicitly
recommended can result in danger to
people and objects.
The tool is to be used only for the in-
tended purpose. Any misappropriation
is regarded as improper use. The user
alone – and definitely not the manu-
facturer – is responsible for property
and personal damage resulting from
such improper use.
The manufacturer cannot be held li-
able if machines from the same are
modified or used improperly and dam-
age occurs as a result.
Caution! A certain residual risk, which
cannot be eliminated, always remains
even in the case of proper use of the
tool. The following potential hazards
can be derived from the type and de-
sign of the tool:
• Contact with the unprotected cutting
head (cuts).
• Reaching into the scythe when it is
running (cuts).
• Hearing damage if no appropriate pro-
tection is worn.
• Dust and gas formation that is harmful
to health if the equipment is used in
enclosed spaces (nausea).