Adjusting The Carburettor; Storage; General Storage Instructions; Storage During Working Breaks - Grizzly MTS 43 AC E2 Mode D'emploi

GB

Maintenance Interval Table

Regularly carry out the maintenance operations listed in the following table. The life of
the saw is extended by regular maintenance of your chainsaw. Furthermore, you get
optimum cutting performance and avoid accidents.
Machine Part
Screws, nuts, bolts
Air filter
Fuel filter
Spark plug
Fuel hoses
Complete machine
Operating handle
Cutting head

Adjusting the Carburettor

The carburettor is preset in the factory for
optimal performance. If subsequent ad-
justments are required, have them carried
out by a specialist workshop.

Storage

General Storage Instructions

• Clean the equipment and accessories
carefully before storage.
• Keep the equipment in a dry and dust-
proof place out of reach of children.
• Do not wrap the equipment in plastic
bags, as damp and mould may form.
• Do not store the equipment on the
protective cover; ideally hang it from
the top handle.
128
Action
Check, tighten
Clean or replace
Replace
Clean/adjust/replace
Check, replace if necessary
Check, clean if necessary
Check for function
Check correct installation
Storage During Working
Breaks
1. Drain the fuel tank in a well-ventilated
2. Start the engine and allow it to tick
3. Allow the engine to cool (approx. 5
In case of working breaks of more than
3 months:
4. Loosen the spark plug with a spark plug
Before
Each Use




Non-observance of the storage
instructions can cause starting
problems or permanent damage
as a result of fuel residues in the
carburettor.
place.
over until the engine stops and the
carburettor is free of fuel.
minutes).
wrench (see "Changing/Adjusting the
Spark Plug").
Operating Hours
10 20



