Télécharger Imprimer la page

Maxi-Cosi AxissFix Air Mode D'emploi page 108

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 110
EN
A - Adjustable headrest
B - Seat Cover
C - Shoulder pads hooks
D - 5-point Harness
E - Shoulder pads with integrated Airbag
F - Shoulder connector
G - Harness buckle
H - Harness adjuster button
I - Harness adjuster strap
J - Recline handle
K - Rotation handle (right & left)
L - Rearward facing/Forward facing
selector button
M - ISOFIX clips activation handle
N - ISOFIX connectors
O - Headrest adjustment handle
P - TOP TETHER tensioning indicator
Q - TOP TETHER tensioning adjuster
R - TOP TETHER
S - TOP TETHER hook
T - TOP TETHER storage
U - Instruction leaflet storage
V - Automatic safety belt
W - Carrying
WARNING:
• Install the AxissFix Air in a rearward-facing
position when your child is from 61 up to 87 cm
in length.
• You may install the AxissFix Air in a
forward-facing position when your child is
from 76 up to 105 cm in length (older than
15 months). The maximum occupant mass
for which the carseat is intended is 19 kg.
110
• The shoulder pad connector component has a
magnetic closure system that is not compatible
with a pacemaker.
• The good operation of the airbag system is
monitored by an electronic device. Whenever
the AxissFix Air seat is connected to the ISOFIX
anchors the system is operational.
• If the ISOFIX connectors of the car seat are not
locked into the ISOFIX anchorages of the
vehicle, the airbag system of the car seat will not
be triggered.
• The deployment of the airbag occurs in a
fraction of a second, at very high speed, to
ensure optimal protection in the event of an
accident. A non-toxic cold vapour can be
released when the airbag is deployed. This is a
normal phenomenon that does not create a risk
of burning to the occupant or other passengers
of the vehicle.
• The car seat contains lithium batteries. For
airplane transportation, please contact the
airline company.
• The airbag contains specific components and
should therefore be considered as special
waste. At the end of life the car seat must be
returned to DOREL after sales.
• Never disassemble or modify any parts and
components of the car seat. Non-observance
of safety warnings may cause injuries and

Publicité

loading