Before Commissioning - JAC TRADILEVAIN TL40 Mode D'emploi

1. BEFORE COMMISSIONING

Thank you for choosing a JAC system. It is essential that you read these instructions
before installing and commissioning this machine. This will protect you and avoid damaging
your machine.
These instructions refer to various illustrations in order to make them easier to understand.
These illustrations are at the end of the instructions. Please refer to them whenever you see
the following symbols: (fig.X, n°Y).
To ensure your machine gives you full satisfaction over the coming years, we invite
you to familiarise yourself with the following advice:
- Enlist the help of your approved agent for installation, commissioning and service
support.
2. WARRANTY
All JAC products are covered by a 5-year parts warranty.
This warranty is valid for all parts on your machine, including electronic components,
excluding consumables (please contact us for further information). Spare parts, which are
available for a minimum of 10 years, are always delivered by express courier. This warranty
takes effect on the date the equipment is installed.
Subject to the following restrictive conditions:
- Installation carried out by an approved agent;
- Equipment used in accordance with the instructions for use and for the intended purpose
for which it was manufactured;
- Equipment serviced on a daily basis in compliance with the instructions for use;
- Regular servicing by the approved agent in compliance with service specifications with,
at least one service a year (servicing chargeable to the user).
- Exclusive use of genuine JAC parts.
This warranty does not cover:
- Replenishment of consumables;
- Parts not accepted as defective by our company;
- Problems due to improper use of the equipment;
- Problems due to installation not carried out by an approved agent;
- Parts or problems due to transit damage or improper handling.
Repairing and/or replacing defective parts during the warranty period does not
bring about an extension to the said warranty.
4