Wilo RainSystem AF Comfort Notice De Montage Et De Mise En Service page 43

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Menu
Description
4 error memory
Main menu: Viewing error memory
view
4.00 cancel current
• Password 02 is required
error...
Deletion of all fault signals with the OK button. The cause of
the fault must be remedied first.
4.01 pump dry run-
Dry running of the pump (see section 12.1). The unit is
ning
switched off until the fault is reset.
CAUTION! Danger of damage to the unit!
When remedying the fault, at least one tap or extraction
point must be open for the purpose of evacuation.
4.02 switching fre-
The pump has switched on and off too many times (see sec-
quency
tion 12.1). The unit is switched off until the fault is reset.
4.03 back pressure
Back pressure (see section 12.1). The unit is switched off until
at overflow
the fault is reset.
4.04 error at
Fault on the water level sensor (see section 12.1). The unit
water lev.sensor
operates in potable water mode until the fault is remedied.
4.05 error at
Fault on the pressure sensor (see section 12.1). The unit is
pressure sensor
switched off until the fault is reset.
4.06 error
Flooding/high water (see section 12.1). The unit is switched
alarm level
off.
(For overflow height, see menu 2.07)
4.07 error
Maximum running time of the pump has been reached (see
max. time pump
section 12.1). The unit is switched off until the fault is reset.
(For pump running time, see menu 2.21)
4.08 error tank
Overflow (see section 12.1). The unit is switched off.
overflow
4.99 back with OK
Return to the main menu
confirm error with
Appears for faults 4.01, 4.02 and 4.07 in alternation with the
fault signal and the default display of the unit.
There will be an error display for faults which are in effect for more than 10 seconds
5 Factory data
Main menu: Factory data configuration
configuration
5.01 data reset
Resets the parameters to the factory settings
5.99 back with OK
Return to the main menu
Installation and operating instructions RainSystem AF Comfort
Parameters
Factory settings
Confirmation with
"OK" button
Confirmation with
"OK" button
Confirmation with
"OK" button
Confirmation with
"OK" button
Confirmation with
"OK" button
Confirmation with
"OK" button and
then confirmation
of the query with
the arrow key
Confirmation with
"OK" button
English
37

Publicité

Table des Matières
loading

Table des Matières