Programming A Somfy Rts Garage Door Motor - SOMFY V200 RTS Manuel D'installation Et D'utilisation

2-wire colour video entry phone - V200 RTS

► programming a somfy rts garage door motor

[1]. Open the motor cover.
[2]. Check that the motor is powered on.
[3]. Select the first channel by pressing the channel selection button on the monitor.
[4]. Press the settings button
The motor settings indicator light comes on and stays on.
[5]. Briefly press the monitor opening button.
The motor settings indicator light flashes then goes off.
3
4
5
Note: To clear the programming on the video entry phone on a Somfy garage door motorisation, repeat all the steps detailed above.
12
on the motor and hold down for 3 seconds.
STOP
STOP
3s
3s
<0,5s
STOP
<0,5s
STOP
Copyright © 2011 Somfy SAS. All rights reserved.