Product Description - SOMFY V200 RTS Manuel D'installation Et D'utilisation

2-wire colour video entry phone - V200 RTS

product description

The video entry phone comprises an indoor monitor and a door station. The indoor monitor is connected to the door station using 2 wires. The
door station can then be connected to a gate motorisation or to a electric door-opener/lock with call memory (12 or 24 V AC or DC - 1A max.) The
video entry phone can be used in this way to control a small or large gate.
The indoor monitor is also fitted with an RTS (Radio Technology Somfy) radio transmitter. This wireless control is used to operate a garage door,
lighting, roller shutters or even a Somfy gate.
► monitor
1
3
No. designation
1 Screen
2 Microphone activation
Wired
button
controls
3 Unlock button
4 Open/on button
Wireless
5 STOP Button
controls
6 Close/off button
7 Channel indicator lights
8
Channel selection button
9 Microphone activation
indicator light
10
Bell volume dial
11
Screen colours dial
12 Screen brightness dial
13 Speaker volume dial
14 PROG button
15 Battery housing
16 Terminal block
4
10 11 12 13
9
STOP
2
description
Used to view the visitor.
Activates the microphone on the monitor to speak to a visitor.
Controls the motorised gate or the electric lock or door-opener.
Control for opening the garage door, roller shutter, gate or for switching lighting on.
Control for stopping the movement of the garage door, roller shutter, or gate.
Control for closing the garage door, roller shutter, gate or for switching lighting off.
Each indicator light represents one channel.
This is used to select the radio channel which controls the garage door, roller shutter,
lighting, door or the product associated with the 5th channel (see page 11 for more
information on the channels).
This informs the user that the microphone on the monitor is on to enable
communication with the visitor.
This is used to adjust the volume of the monitor bell.
This is used to adjust the screen colours on the monitor.
This is used to adjust the screen brightness on the monitor.
This is used to adjust the volume of the speaker on the monitor.
This is used to program the monitor to wirelessly control RTS (Radio Technology
Somfy) equipment.
Housing for CR2430-type battery (battery included) on the radio transmitter.
This is used to connect the monitor to the door station and the power supply.
4
5
6
14
7
8
15
Copyright © 2011 Somfy SAS. All rights reserved.
16