SOMFY V200 RTS Manuel D'installation Et D'utilisation page 34

2-wire colour video entry phone - V200 RTS
on a somfy rts light receiver
Caution: The receiver uses a 230V power supply. For your safety, ensure that you do not touch the terminal or the bare wires.
[1]. Open the light receiver.
[2]. Check that the receiver is powered on.
[3]. Press the PROG button on the receiver until the indicator light on the receiver comes on. The programming function is activated for 2 minutes.
[4]. Select the second channel by pressing the channel selection button on the monitor.
[5]. Use a fine-tipped object to briefly press the PROG button at the back of the monitor (above the battery housing).
The indicator light on the receiver flashes for 5 seconds.
3
2 s
RTS outdoor lighting receiver
4
5
Note: To clear the video entry phone programming on a Somfy light receiver, repeat all the steps detailed above.
14
2 mn
STOP
2 s
RTS indoor lighting receiver
5 s
5 s
Copyright © 2011 Somfy SAS. All rights reserved.