Burkert eCONTROL 8611 Guide De Démarrage Rapide page 7

BasicSafetyInstructions
3. Basic safeTy
insTrucTions
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations – the operator is responsible for observing
these regulations, also with reference to the installation personnel.
General hazardous situations.
To prevent injury, ensure that:
• any installation work may be carried out by authorized techni-
cians and with the appropriate tools only.
• after an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• the device may be operated only when in perfect condition and
in consideration of the operating instructions.
• the general rules of technology apply to application planning
and operation of the device.
Type 8611
NOTe!
electrostatic sensitive components / modules!
The device contains electronic components which react sensitively
to electrostatic discharge (ESD). Contact with electrostatically
charged persons or objects is hazardous to these components. In
the worst case scenario, they will be destroyed immediately or will
fail after start-up.
• Observe the requirements in accordance with EN 61340-5-1
and 5-2 to minimise or avoid the possibility of damage caused
by sudden electrostatic discharge!
• Also ensure that you do not touch electronic components when
the power supply voltage is present!
The process controller Type 8611 was developed with due
consideration given to the accepted safety rules and is state-
of-the-art. Nevertheless, dangerous situations may occur.
Failure to observe this operating manual and its operating
instructions as well as unauthorized tampering with the device
release us from any liability and also invalidate the warranty
covering the devices and accessories!
english
7