Burkert eCONTROL 8611 Guide De Démarrage Rapide page 27

OperationandFunction
9.2.1. switching between the operating
levels and operating states
The ENTER key is pressed to change the operating level and oper-
ating state (see Fig. 11).
Any changes made within the configuration level are only
stored after returning to the process operating level.
Changes in the Manual operating state can be made while
the controller is running.
Process operating level
Operating state
AUTOMATIK
Press button
> 5 s (long)
8611
eCONTROL
025.5
L / M
< 1 s (short)
ENTER
O
u
0..... 9
t
SET
PARA
VALV
TEST
BACK
Fig. 11: Changing the operating level and operating state
Type 8611
Configuration
level
eCONTROL 8611
MODE
ENTER
O
u
0..... 9
t
MODE
Operating
UNIT.
state .
.
HAND
.
END
9.3. funktion of the keys
The device is operated using two arrow keys and one ENTER key.
The function of these in respect of the operating level and the oper-
ating state is shown in the table below.
operating operating
level state
Switch display
between actual
AUTO-
value, set-point value
MATIC
and manipulated
variable
Level 1:
Process
Switches
operating
to the
level
last
menu
option
MANUAL
Entering of values
Increase
value
english
• Press key briefly
(< 1 s):
Switches to
operating state
MANUAL
• Press and hold
key (> 5 s):
Switches to
configuration
level
Switches
• Selection of
to the
menu option
next
menu
• Take over
option
settings
• Switches to
operating state
Change
AUTOMATIC
by one
(for display
position
BACK)
to the left
27