Burkert eCONTROL 8611 Guide De Démarrage Rapide page 26

9.1.2. control elements
arrow keys
• Change the display at the process oper-
ating level in AUTOMATIC operating state
• Change the menu options in MANUAL
operating mode and at the
left right
configuration level
• Entering of numerical values
enter button
• Switches between the operating states
AUTOMATIC and MANUAL
• Switches between operating and configu-
ration level
• Selection of menu option
• Take over settings
The detailed description of the function can be found in chapter
"9.3. Funktion of the keys".
26
english
Type 8611
OperationandFunction
9.2. operating levels and operating
states
2 operating levels and 2 operating states AUTOMATIC and MANUAL
are available for the operation and setting of the eCONTROL Type
8611.
level 1: P rocess operating level
At level 1, the user can switch between 2 operating
states AUTOMATIC and MANUAL.
operating state: a utoMatiC: The normal control
level 2: C onfiguration level
At level 2, the user can change the basic settings of the
controller.
After switching on the operating voltage, the controller is at the
process operating level and in the AUTOMATIC operating state.
When the operating voltage is applied, the software version will light
up on the display for approx. 2 seconds.
If the ENTER key is pressed during these 2 seconds, the sub-
version is displayed. After this, the controller is once again at the
process operating level.
mode is executed and monitored.
Manual: Quick access to important
functions and test functions.
The operating state
MANUAL is indicated on the
display by a hand symbol.