Burkert eCONTROL 8611 Guide De Démarrage Rapide page 43

ConfigurationLevel
Setting of the control range
VALV
MODE = SCV, 4 – 20, 0 – 10, 2P – T, 3P – T
L / H *
Open
Close
PRZ
MODE = PCV, 2P – T, 3P – T
L / H
Open
Close
Enter code protection
The following operator actions are blocked if code protection is activated:
CODE
• Changing the controller parameters in manual mode under the PARA menu
• Access to the configuration level
factory setting:
Upon delivery from the factory, the display in the CODE menu is set to 0000. This means that the code pro-
tection is not activated. Switching to the configuration level is done without query of the code.
DSPL
Fig. 25: Operating structure of the configuration level - 11 of 12
Type 8611
Back without store
) END
Store as MIN value
** ) MIN
Store as MAX value
MAX
* )
Back without store
*
)
END
Enter MIN
** MIN
)
MAX Enter MAX
* ) The display depends
on the control variable
set in the MODE
menu (see Fig. 15)
Press the up arrow
** )
key to open the
actuating element,
and the down arrow
key to close the
actuating element.
english
43