Burkert eCONTROL 8611 Guide De Démarrage Rapide page 13

Binary input
Input impedance:
Response threshold:
Max. frequency:
6.5.2. outputs
Continuous signal Standard signal 4 - 20 mA
Max. loop resistance:
Precision:
Standard signal 0 - 10 V
Maximum current:
Precision:
Discontinuous signal 2 transistor outputs for PWM or
PTM control
Control frequency:
Max. resolution:
Max. current per
unit area:
Switching voltage:
Binary output Transistor output (PNP) configurable
Max. current per
unit area:
Switching voltage:
Sensor supply: 24 V DC
total load for all outputs:
Type 8611
Assembly
10 kΩ
3 ... 30 V
1 kHz
680 Ω
0,5 %
20 mA
0,5 %
1.2 kHz ... 20 Hz
16 bit (depending on
frequency)
1.5 A
24 V DC
1.5 A
24 V DC
1,5 a
7. asseMBly
7.1. assembly models
attachment to a Bürkert
flow-rate fitting
Bürkert
flow-rate
fitting Type
SO30
installation in a control cabinet
english
attachment to a proportional
valve
The description of the instal-
lation in a control cabinet and the
device dimensions can be found
in the following chapter "7.3.
Assembly of the control cabinet
model"
13