CLAS PE 2008 Mode D'emploi page 61

PE 2008 PE 2003
2.0 FOREWORD
This manual includes the instructions relating to the installation, use and maintenance of the lift
system called «Vehicle Lift». The vehicle lifts described in this manual are designed and constructed
solely to lift vehicles for repair, maintenance and inspection purposes. Lift operation, economy and
duration depend on the compliance with the instructions given in this manual. The parts that can
be supplied also as spare parts are listed in the last section of the manual. To make instructions
reading easier, vehicle lift will be hereinafter simply called «lift».
2.1 EC CERTIFICATION
2006/42/EC Directive, commonly known as the «Machines Directive» specifies the conditions to be
respected before a machine can be put into the market. This Directive provides that all machines
can be marketed and commissioned only if they do not jeopardise people, pets or property safety
and health. To certify lift compliance with Directive provisions, before marketing, the manufacturer
subjected a machine specimen to the audit of a notified body.
Lift, manufactured in compliance with 2006/42/EC Directive provisions, and can thus be marketed
without jeopardising user's safety.
Lift is thus delivered to the customer with:
• EC Declaration of Conformity
• CE Marking
• Instructions for use
• Inspection records
The basic model of the lift (H=3870) can be equipped with the following kits :
• Series column extension set PE 2003 (H= 600)
• Series column extension set PE 2009 (H= 1200)
without modifying the Declaration of CE Conformity of the lift.
2.1.1 TESTING
The lift has undergone static and dynamic tests based on the procedures included in the UNI EN
1493:2010.
The instructions given in this manual shall be compulsorily respected: the Manufacturer
will not be held responsible under any circum-stances arising from negligence, from
non-compliance with the instructions and from an improper or inconsiderate use of the
lift. Failure to comply with the instructions given in the manual makes the warranty
directly become null and void.
The Company also disclaims any liability for damages caused by lift improper use and/or
due to changes made without the manufacturer's authorisation.
PE 2009
61