Videotec MAXIMUS MVX Manuel D'instructions page 32

7 Accessories
A series of accessories for the device in use
are now available. Refer to the handbook
for relative descriptions.
8 Instructions for normal
operation
8.1 Enabling the wiper (Wiper)
Do not use the wiper if the outside
temperature is below 0°C or in case of ice.
To activate/deactivate this function, refer to the
manual of the control device used or to the relative
chapter (8.3 Special controls, page 30).
8.3 Special controls
SPECIAL CONTROLS
Control
Wiper Start
Wiper Stop
Washer
Night Mode On
Night Mode Off
Reboot the device
Enabling OSM
Tab. 5
30
Protocol
VIDEOTEC MACRO ONVIF (auxiliary com-
mand)
Save Preset 85 tt:Wiper|On
Aux 3 ON –
Wip+ –
Save Preset 86 tt:Wiper|Off
Aux 3 OFF –
Wip- –
Save Preset 87 tt:WashingProcedure|On
Aux 4 ON tt:WashingProcedue|On
Was+ –
Save Preset 88 tt:IRLamp|On
– –
Save Preset 89 tt:IRLamp|Off
– –
Save Preset 94 –
Ini+ –
Save Preset 95 tt:OSM|On
Men+ –
8.2 Enabling the washer (Washer)
To activate/deactivate this function, refer to the
manual of the control device used or to the relative
chapter (8.3 Special controls, page 30).
PANASONIC
Save Preset 85
Save Preset 54
–
Save Preset 86
Save Preset 55
–
Save Preset 87
Save Preset 56
–
Save Preset 88
Save Preset 57
Save Preset 89
Save Preset 58
Save Preset 94
Save Preset 61
Save Preset 95
Save Preset 46
PELCO D
Save Preset 85
Aux 3 ON
–
Save Preset 86
Aux 3 OFF
–
Save Preset 87
Aux 4 ON
–
Save Preset 88
–
Save Preset 89
–
Save Preset 94
–
Save Preset 95
–
MNVCMVXCAM_1545_EN