Videotec MAXIMUS MVX Manuel D'instructions page 21

6.1.6 Display Menu
It allows you to configure the following parameters:
Received Commands: If not on OFF, it is used
1.
to select how the received serial commands are
displayed. It is possible to select timed (1s, 3s
and 5s) or constant (CONST) display.
2. Alarms: When not switched to OFF, this is used
to select the display mode for the alarms. It
is possible to select timed (1s, 3s and 5s) or
constant (CONST) display.
DISPLAY
------------------------
1>RECEIVED COMMAND:CONST
2 ALARMS
Fig. 27
MNVCMVXCAM_1545_EN
6.1.7 Options Menu
It allows you to configure the following parameters:
1.
2.
3.
4.
5.
: OFF
Fig. 28
Alarms: Allows access to the Alarms menu.
Washer: Allows access to the Washer menu.
Test functions: Allows access to the Test
Functions menu.
Communications: Allows access to the
Communications menu.
Ceiling Mount: Flip the image.
OPTION
------------------------
1>ALARMS
3 TEST FUNCTIONS
4 COMMUNICATIONS
5 CEILING MOUNT
>
>
>
:OFF
19