Publicité
Les langues disponibles
Les langues disponibles
6.1.7.3 Test function menu
A diagnostic menu is available to conduct operational
tests on the device.
It allows you to configure the following parameters:
Enable the Relay: Allows users to enable the
3.
relay.
4.
Device reboot: Allows users to reboot the
device.
5.
I/O status: Allows access to the l/O status menu.
TEST FUNCTIONS
------------------------
3>RELAY ON
4 DEVICE REBOOT
5 I/O STATUS
Fig. 31
MNVCMVXCAM_1545_EN
6.1.7.3.1 I/O status menu
This menu displays the status of certain device
components (useful for diagnostic functions).
Input alarm: Displays the alarm status (enabled or
disabled).
Dip In: Displays the status of the control board dip-
switch.
Relay: Displays the relay status (enabled or disabled).
Wiper: Displays the wiper status (enabled or
disabled).
Camera Power Supply: Displays the camera status
(enabled or disabled).
: Y
I/O STATUS
------------------------
: Y
ENTRY ALARM
>
DIP IN
RELAY
WIPER
CAMERA POWER
Fig. 32
: 0
: 0
: 0
: 0
: 1
21
Publicité
