Videotec MAXIMUS MVX Manuel D'instructions page 26

Click Add.
Fig. 38
Assign a name to the camera and to the unit. Select
the ONVIF or TCAM protocol and set the device's
IP address and the access credentials. Select the
streaming profiles and make sure the entry Use PTZ is
enabled. Click Ok.
Fig. 39
24
The camera will be available in the device list (Camera
list) and can be displayed by dragging-and-dropping
the icon onto one of the squares not used.
Fig. 40
To display the cameras on different computers, install
the TVMS client and use it to connect to the TVMS
server in remote. Configure the client by accessing it
with the default credentials.
Login: admin
Password: 1234
Click Setup.
Fig. 41
MNVCMVXCAM_1545_EN