Videotec MAXIMUS MVX Manuel D'instructions page 24

6.1.7.4 Communication menu
It allows you to configure the following parameters:
Serial ACK: Enables or disables the ACK
1.
response for each command sent (if foreseen by
the serial communication protocol).
2. ACK PelcoD Standard: enables or disables
the standard PelcoD format for the response
messages
3. Device address: Allows users to configure the
device address.
4. RS-485 speed: Allows users to set the serial port
speed.
COMMUNICATIONS
------------------------
1>SERIAL ACK
2 ACK PELCOD STAND:
3 DEVICE ADDRESS
4 RS485 SPEED
Fig. 33
22
6.1.8 Default Menu
1.
4.
: N
N
: 255
:38400
Fig. 34
6.1.9 Info Menu
The menu is used to check the configuration of the
device and the installed firmware version.
Fig. 35
Cancel Setup: Resets all settings to the default
factory status.
Device reboot: Allows users to reboot the
device.
DEFAULT
------------------------
1>DELETE SETUP
2 DEVICE REBOOT
The above mentioned operations cause the
loss of all previously stored data.
INFO
------------------------
ADDRESS :
PELCOD :
MACRO :
PANASONIC:
RS485 :
HW :
FW :
PC :MVXHD2F0WAZ00A
SN : 122333334444
: N
: N
255
Y
Y
Y
38400 N81
01
0.9.3
MNVCMVXCAM_1545_EN