Publicité
Les langues disponibles
Les langues disponibles
6.1.5.5 Advanced Setting Menu (Infrared)
It allows you to configure the following parameters:
IR Mode: If set to OFF it forces the day mode in
1.
a continuous manner. If set to ON it forces the
night mode in a continuous manner. If set to
Auto, it activates the automatic switching of the
camera.
2.
Night Level: Sets the detection threshold of the
light conditions for the night mode switching.
Lower values correspond to lower lighting
levels.
Night Delay: Sets the detection time of the
3.
darkness conditions, expressed in seconds,
before switching to night mode.
Day Level: Sets the detection threshold of the
4.
light conditions for the day mode switching.
Lower values correspond to lower lighting
levels.
5.
Day Delay: Sets the detection time of the
light conditions, expressed in seconds, before
switching to night mode.
6.
Cut Off Filter: If it is set on S, the product works
regularly. If it is set on N, the camera does not
switch between night and day mode, but it
works only in day mode.
MNVCMVXCAM_1545_EN
To avoid false switching, we recommend
choosing the higher day switching
threshold and delay values.
INFRARED
------------------------
1>IR MODE
2 NIGHT LEVEL
3 NIGHT DELAY
4 DAY LEVEL
5 DAY DELAY
6 CUT OFF FILTER:
Fig. 24
This is a dynamic self-configuration menu based on
the choice made and shows the parameters on which
it is possible to operate.
:
AUTO
:
5
:
5
:
20
:
30
Y
17
Publicité
