Publicité
Les langues disponibles
Les langues disponibles
6.1.7.1 Alarms Menu
From the Alarms menu users can access the Alarm 1
menu and change the settings.
It allows you to configure the following parameters:
Type: Set the type of contact: normally closed
1.
(N.C.) or normally open (N.O.).
2.
Action: The type of action carried out by the
unit when the alarm triggers (Relay, Washer,
Wiper). If Off is selected, the alarm is disabled.
3.
Text: It is possible to set the wording displayed
when the alarm is enabled.
ALARM 1
------------------------
STATUS
:
1>TYPE
:
2 ACTION:
3 TEXT
:
Fig. 29
This is a dynamic self-configuration menu based on
the choice made and shows the parameters on which
it is possible to operate.
20
6.1.7.2 Washer Menu
The unit offers the possibility to use a wiper and to
operate a pump to clean the glass.
It allows you to configure the following parameters:
1.
2.
3.
4.
OPEN
N.O.
OFF
ALARM
Fig. 30
Enable: Enabling the Washer function.
Wiper On Delay: Select the time interval
between the pump and wiper.
Washing Length: Choose the duration of
brushing.
Wiper On Delay: Select the time interval
between the pump and wiper.
WASHER
------------------------
1>ENABLE
2 WIPER-ON DELAY
3 WASHING DURATION
4 WIPER-OFF DELAY
:
N
:
5
: 10
:
5
MNVCMVXCAM_1545_EN
Publicité
