Videotec MAXIMUS MVX Manuel D'instructions page 31

6.3.10 Encoder Parameters
The first 2 video streams can be configured under
the Encoder Parameters menu. The first stream
is compulsorily compressed with the H.264/AVC
algorithm while the second can, alternatively, use the
MJPEG code. For both streams it is possible to set the
video dimension, the frame rate, the use of the rate
controller and the GOP size. The On Screen Display
(OSD) can also be configured in order to name the
video before compressing it.
Any additional video flows can only be
configured using the ONVIF protocol.
Fig. 59
MNVCMVXCAM_1545_EN
6.3.11 Tools page
From menu entry Tools it is possible to re-set the
predefined values for the entire configuration of
device or only for a number of specific sections.
This section:
• Update the firmware of the device.
• Restart the device.
Fig. 60
29