Ultraflex UC 81 Manuel D'installation Et De Maintenance page 27

17
Insert the washers (18) on the two ends of the stem and screw in the nuts (19) with a
tightening torque of 35 Nm (25,8 lb ft) and galling-proof grease such as MOLYKOTE® 1000.
18
18
Insert the washers (20) on the two ends of the stem and screw in the nuts (21) with a
tightening torque of 35 Nm (25,8 lb ft), and galling-proof grease such as MOLYKOTE® 1000.
19
Check the motor can freely rotate.
NOTE
If while tilting the motor turns out to be locked, reduce the overall dimensions of the
spacers.
19
21
HYDRAULIC CYLINDER FOR OUTBOARD MOTOR
Installation and Maintenance Manual
20
27
- page