Ultraflex UC 81 Manuel D'installation Et De Maintenance page 26

14
Insert the plastic spacers and the two stainless steel washers on the motor rod.
CAUTION
The stainless steel washers must be both positioned towards the motor tube, on the
opposite side with respect to the bullhorns to prevent their wear during lifting and
lowering of the motor.
15
Insert the two bullhorns making sure that the 2 steel bushes (17) are correctly positioned
on the rod (as shown in step 10).
CAUTION
Use the UC81 hydraulic cylinder without the steel bushes may cause irreversible damage
to the bullhorn.
16
Rod and motor rod are now connected as shown in the figure.
26
page -
CYLINDRE HYDRAULIQUE POUR MOTEUR HORS BORD
Installation and Maintenance Manual
17