Ultraflex UC 81 Manuel D'installation Et De Maintenance page 25

12
Position temporarily the bullhorns, without mounting them with the nuts, both on the
cylinder's stem and on the motor rod. Locate the spacers (15) to be used to compensate
for the space between the ring nut and bullhorn and between tube and motor bullhorn,
considering the thickness of the stainless steel washer (16).
15
CAUTION
Always provide a minimum clearance between spacers and bullhorn such as to allow the rotation
of the rod inside the motor tube.
13
Once you have identified the correct spacers, pull out the bullhorns.
Installation and Maintenance Manual
16
HYDRAULIC CYLINDER FOR OUTBOARD MOTOR
16
15
25
- page