Publicité
Les langues disponibles
Les langues disponibles
9
Referring to the "Application Guide" identify the spacers needed to be placed on the motor
rod.
NOTE
In this phase, make sure that the cylinder body is perfectly centred with respect to the rod
and that the motor is perfectly perpendicular to the transom.
10
Insert the bullhorn bushes (12) on the rod, (13), one for each side.
11
Insert the two bullhorns (14) connecting rod and motor rod as shown in the figure.
14
CAUTION
DO NOT forget to put the bushes of bullhorns.
24
page
-
CYLINDRE HYDRAULIQUE POUR MOTEUR HORS BORD
AVERAGE
WIDE
13
12
Installation and Maintenance Manual
CLOSE
Publicité
