Ultraflex UC 81 Manuel D'installation Et De Maintenance page 13

E
D
CONTENT OF THE STANDARD PACKING:
A
No. 1 cylinder
B "Bullhorn" brackets
1 motor tube shaft kit composed of:
C
• motor tube shaft (2 pieces)
• 2 self-locking nuts + 2 washers
• 1 key for motor shaft
No. 1 spacers kit consisting of:
D
• No. 10 plastic spacers
• No. 2 steel spacers
• No. 1 fine adjustment ring nut fitted with screw and nut
E
No. 1 kit screws consisting of:
• No. 2 self-locking nuts + No. 2 washers + No. 2 bushes
• No. 1 screw
• No. 1 self-locking nut
• n°4 O-Rings (to be used in case of starboard/port configuration change)
• No. 1 label
F Instructions:
• Installation and Maintenance Manual
• Application guide
Installation and Maintenance Manual
HYDRAULIC CYLINDER FOR OUTBOARD MOTOR
A
B
C
13
- page