Ultraflex UC 81 Manuel D'installation Et De Maintenance page 19

5
Fasten the plug with the extension on the new position with the relevant screws and
washers, with a tightening torque of 10 Nm (7,4 lb ft).
CAUTION
Take care that the key (8) and the head (9) coincide.
In repositioning the cap the plastic head should NOT be rotated or moved.
In order not to reduce the effectiveness of the thread blocking compound, DO NOT lubricate the screws.
6
Turn the cylinder by 180'.
8
HYDRAULIC CYLINDER FOR OUTBOARD MOTOR
Installation and Maintenance Manual
9
19
- page