Ultraflex UC 81 Manuel D'installation Et De Maintenance page 20

7
The cylinder is now in "port" configuration.
WARNING
The hex head screw (10) is fixed at the bottom with a safety punching; DONOT try to unscrew for
any reason.
8
Proceed installing the cylinder.
3.3.2 Assembly of the cylinder
1
After removing the protective caps of the fittings (1), manually centre the rod (2) with
respect to the body of the cylinder (3).
2
CAUTION
During this phase a small amount of oil may spill from the fittings, that this oil must never be
poured into the environment.
20
page -
CYLINDRE HYDRAULIQUE POUR MOTEUR HORS BORD
Installation and Maintenance Manual
1
10
3
1