Publicité
Les langues disponibles
Les langues disponibles
3
Pull the cap with extension (3) and remove the 4 O-Rings (4) from their seats.
3
CAUTION
When removing the cap with the extension (3) it is necessary to hold the rod (5) so that the head does not
protrudes (6).
4
Insert the 4 new O-Rings provided (7) into their seats.
CAUTION
When handling the cylinder, make sure that the O-Rings do not come out from their seats.
Turn the extension plug 180° and re-insert it on the cylinder, as outlined in the figure.
18
page
-
CYLINDRE HYDRAULIQUE POUR MOTEUR HORS BORD
Installation and Maintenance Manual
6
4
5
7
Publicité
