Positioning The Movement Sensor Pad; Important - Angelcare AC117 Manuel De L'utilisateur

WARNING
STRANGULATION HAZARD.
Children have STRANGLED in cords:
• Keep adapter cords out of the reach of children
(more than 3 feet [1 meter] away).
• Because of the serious strangulation risk to infants
and toddlers, parents and caregivers should never
place the Nursery Unit within 1 meter of a crib.
• NEVER use extension cords with adapters. ONLY
use the adapters provided. This product is not a toy.
Never allow children to play with it.
STEP 2 - POSITIONING THE MOVEMENT SENSOR PAD
2.1 - POWERING THE MOVEMENT SENSOR PAD
When using the Sensor Pad for the first time, you will need to insert the provided
CR3032 battery.
2.2 - INSTALL THE SENSOR PAD ON THE MATTRESS SUPPORT

IMPORTANT

If your crib does not have a solid, stable surface for the Sensor Pad, you will
need to place a support under it, to ensure correct operation of the system.
This hardboard support should be at least 1/4'' (6 mm) thick and should have
minimum dimensions of 13'' x 13'' (33 x 33 cm). This support board must be
larger than the Sensor Pad surface area.
The Sensor Pad functions with any size and type of mattress except memory-
foam mattresses, hollow frame mattresses and water beds. The hardboard
maintains a constant pressure on the Sensor Pad, enabling it to detect the
baby's movements even when the baby is at the edges of the crib.
8
1) Remove the battery cover using
a coin. Turn in the direction of
the arrow.
2) Place the included battery
(CR3032) in the compartment.
Note: The + symbol should be
facing up.
3) Replace the battery cover
(the two dots will line up). The
Sensor Pad is now ON.
4) Verify the wireless Sensor Pad
icon is on the status bar of
your Parent Unit when set up is
completed.
Hardboard