Publicité
Les langues disponibles
Les langues disponibles
16-Channel Digital Video Recorder
NOTE: The system's default is Using LAN. When using a modem for remote connection, remove the check
from the Using LAN box, and then select the operating system on the remote system; either Windows 98 or
Windows XP.
NOTE: See Chapter 2 – Tools: SmartSearch section for setting up and using the SmartSearch.
Appendix 1 — Accessing Windows
Since the DVR is new technology, it might be unfamiliar to many users. Many problems can occur from
incorrect Windows settings. The DVR requires specific Windows settings for optimal performance. That is why
the Windows mode has been blocked. This section describes the steps to get into the Windows mode.
The Relationship Between "Accessing Windows" and "SmartShell"
The SmartShell is the only way to get into the Windows mode. See Appendix 2 – SmartShell. To access
Windows, you must be in the SmartShell mode because the DVR will shut down when you click the POWER
button in the SmartGuard mode. Use the following instructions to change the Automatic Shutdown mode so
that you will to be able to access Windows.
How to Access the Automatic Shutdown Hidden Dialog Box
Double click the logo (or empty space) located above the Rec button in the SmartGuard mode. The splash
window appears.
Type idisman and press the Enter key on the keyboard. A small dialog box appears.
Move to Automatic Shutdown, and check the box to shutdown the DVR when you end SmartGuard. If this
box is not checked, the DVR will enter the Windows mode via the SmartShell when shutting down
SmartGuard.
You can save your changes by clicking the OK button. Selecting Cancel exits the dialog box without saving
the changes.
CAUTION: Do NOT change other options and keep the factory default setting. Ask your system administrator
about other options in the hidden dialog box.
How to Access Windows
If you release the Automatic Shutdown mode in the hidden dialog box, clicking the POWER button in the
SmartGuard mode causes the DVR to enter the SmartShell mode. Click the right mouse button in the
SmartShell mode. The following Menu dialog box appears.
Click System to open options, and select Close. The DVR will enter the Windows mode. To return to the DVR
programs, click the Start button on the Task Bar, move the cursor to Programs, and then to DVR to open the
program list. Select SmartShell. The DVR will enter the SmartGuard mode via the SmartShell.
59
Publicité
