Capture CPT-DVR4132XP Manuel D'utilisation page 132

9.
Move to Retry Counts, and enter the number of times you would like the DVR to try contacting the server
if the connection fails.
10.
Move to When, and select the target event. The DVR will call when the selected events occur. Multiple
selections are available. You can save your changes by clicking the OK button. Selecting Cancel exits
the Set up Callback dialog box without saving the changes.
NOTE: Callback messages will be displayed on the system status window of the target server. They include
event type, event detection time, and system location entered during the System setup.
1.
Click the Set up Email..., and set up the e-mail transmission.
2.
Move to Use Email, and check the box to enable e-mail transmission function.
3.
Move to When, and select the target event. The DVR will send an e-mail when the selected events
occur. Multiple selection is available.
4.
Move to SMTP Server, and click the text field beside Server Address. And then enter an SMTP server IP
address.
5.
Move to Login, and check the box if you want to connect the SMPS server and so login is required. And
click the text field beside ID and Password then enter the ID and password for login.
6.
Move to Email message, and click the text field beside Sender. And then enter a sender's e-mail
address. Click the text field beside Recipient, and enter a recipient's e-mail address. Click the text field
under Message, and type in the e-mail message.
NOTE: If you want to send the e-mail to multiple recipients, enter a "," or ";" between e-mail addresses in the
Recipient box.
16-Channel Digital Video Recorder
25