Publicité
Les langues disponibles
Les langues disponibles
5.
Click the text field beside New password and Confirm new password, and enter the password using
either the actual keyboard or the virtual keyboard. The Old password may not be used when entering a
password for a newly registered user. After you have set up the password, you can save your settings by
clicking the OK button. Selecting Cancel exits the dialog box without saving the changes.
NOTE: Up to eight characters may be used for a password.
NOTE: The password will not be saved when New password and Confirm new password do not match.
6.
After you have set up the user information, you can save your settings by clicking the OK button.
Selecting Cancel exits the dialog box without saving the changes.
7.
Click the Edit User button to edit the established user information. If you want to delete the user, click the
Delete User button after selecting the user to delete in the list.
NOTE: The password will not be changed when the Old password does not match, or the New password and
Confirm new password do not match.
8.
Select a registered user in the list, and check the desirable option boxes to set the user's authorization.
NOTE: For the remote access from the BASE system, the Remote Monitoring option should be selected for the
user's authorization. And, select the Remote Search if you want to review recorded video on the POST
system, and select the Network Remote Control if you want to control the DVR remotely using the network
connections.
9.
Click the Available Camera button if you want to assign the camera number individually to each user.
Check the box beside the camera number to enable the user to monitor and review that camera
image. Clicking the Enable all or Disable all button enables or disables all the cameras to the target user.
Click the Apply all user in same level button if you want to adjust the current authority settings to all users in
the same authority level.
10.
Move to No local login, and check the box if you do not want the login procedure. Otherwise, the User
Login dialog box will appear when clicking any function button and asks entering User ID and Password.
11.
Move to Monitoring without login, and check the box if you want to monitor the image without login
procedure.
12.
Move to Auto Logout, and check the box then set the logout dwell time (from 1 to 180 minutes) if you
want to log out the DVR automatically when there is no keyboard or mouse operation during the preset
dwell time.
16-Channel Digital Video Recorder
27
Publicité
