Capture CPT-DVR4132XP Manuel D'utilisation page 154

CAUTION: During the manual backup, SmartGuard will stop recording.
Manual Backup by Time
1.
Move to Destination, and select a backup drive from a drop-down list.
2.
Move to Begin, and set the backup beginning date and time. Select the beginning date from the
drop-down list, and set the beginning time using the arrow buttons.
3.
Move to End, and set the backup ending date and time. Select the ending date from the drop-down
list, and set the ending time using the arrow buttons.
4.
Click the Start button to start the manual backup by time. The DVR backs up the recorded data from the
established beginning date and time to the established ending date and time. Only time-lapse mode
recorded data will be backed up. Selecting Cancel exits the dialog box without saving the settings.
NOTE: Backup of audio data, pre-alarm images, and text-in data can only be done by using the Manual
Backup by List. See the following Manual Backup by List section.
Manual Backup by List
1.
Click the Advanced... button. The following Manual Backup (Advanced) dialog box appears.
2. ID
displays the serial number of the record banks.
NOTE: The BANK is the basic unit for the database used by the DVR system.
3.
Recording Start Time and Recording End Time display the recording beginning date/time and ending
date/time of each bank.
4.
Type displays the type of record bank. Normal means time-lapse recording, and PRExx means the
pre-event recording.
5.
Backup Status displays whether a target bank has already been backed up or not.
16-Channel Digital Video Recorder
47