Capture CPT-DVR4132XP Manuel D'utilisation page 153

User's Manual
Stored Image Information
• Drive Status
- Drive: Shows all attached storage devices including hard disk drive(s) and CD-RW drive.
- Type: Shows the usage of each drive (
recording and backup, backup icon will be displayed.
- Recording Period: Shows the recording period contained on each (source or target) drive.
- Status: Shows the drive's status (
• Recording Period: Shows the recording period contained on the recording drive.
• Latest Backup Time: Shows the latest backup date and time of the target drive.
Backup Drive Information
• Period: Shows the recording period contained on the backup drive.
• Remain: Calculates and shows the remaining space on the backup drive.
Status
Shows backup drive status and a progress bar for the auto/manual backup.
Manual
Click the Manual... button to start the manual backup mode. When the DVR is set to Auto Backup mode,
this button will be inactivated. Release the auto backup mode during the SmartBackup Setup if you want to
set up the manual backup. See the following Manual Backup section for setting up the manual backup.
Update
Click the Update button to update the values in the SmartBackup dialog box. Recording Period, Latest
Backup and Backup Drive Information will be updated any time this button is selected.
Setup
Click the Setup... button to set up the backup information. See the SmartBackup Setup section.
CD Burner
Click the CD Burner button to save the backup data on the CD-R or CD-RW media using the CD burning
program.
Hide
Click the Hide button to hide the SmartBackup dialog box. To close the dialog box and exit from the
SmartBackup, click
Manual Backup
Click the Manual... button in the SmartBackup dialog box to start the manual backup mode. The following
Manual Backup dialog box appears. There are two ways to back up data manually; backup by time and
backup by list.
46
: Recording,
: Full, : Available,
at the top-right hand corner.
: Backup). When the drive is used for both
: Empty, : Not initialized).