Publicité
Les langues disponibles
Les langues disponibles
User's Manual
POS
Clicking the POS icon
data coming from the POS remotely.
Event Log List
Shows event logs and callback messages of the remote system. Scroll up and down the list by holding down
the left mouse button on the list while moving the cursor up and down, or roll the mouse wheel on the list.
The display information of the event log and callback message is shown below:
Event Log – Date_Time (Site Name)
[Camera No. of the BASE system] Alarm Type Alarm No.
Callback Message – Date_Time (callback)
Site Name : Alarm Type Alarm No.
Utility Buttons
Full Screen: Click this button to enter the full-screen mode. All of the control buttons disappear,
and the monitoring window takes up the full screen in the full-screen display mode. To return from
the full-screen mode, click the left mouse button anywhere on the screen.
NOTE: Full-screen display cannot be supported if the VGA card of the system does not support the overlay
function.
Mode Selection: The record mode is selected when this button is clicked. SmartBase returns to
view only mode automatically when it is unable to record (for example, when the hard disk is full).
NOTE: The DVR records only in accordance with the recording schedule, which can be set during the system
setup. Before you install the DVR, you need to fully understand the recording schedule. Note also that
clicking this recording mode button only prepares the DVR for recording. In this state, the DVR will follow the
recording schedule.
Connect: When this button is clicked, the following Connecting Window appears. If you want to
search the site quickly from the site list, enter the site name or address in the text field and then hit
the enter key. Entering the ID and password of the remote system to connect is required. Check
the Auto connect
when callback box if you want to connect to the remote site automatically when receiving a
callback
message.
NOTE: If you want to arrange the site list in the descending orders, click the Site or Address headings on the list
box.
54
button causes the POS control buttons to display. The user can watch the text
Publicité
