Publicité
Les langues disponibles
Les langues disponibles
Alarm
Clicking the alarm icon
can check the alarm status and control the alarm output. Pressed alarm button is active mode, and
released button is inactive mode. The user can active or inactive alarm output manually by clicking the
button when it is released or pressed.
SmartGuard, the alarm button will be disabled.
POS
Clicking the POS icon
status window will display the POS data. Click the right mouse button on the window to toggle two display
modes: POS data display mode, and event log including POS data display mode. The POS button LED will
be lit while the data is coming from the POS. If you do not want to display the data from the POS, release the
target POS number button. If the user disables the POS device during the Text-In setup on the SmartGuard,
the POS button will be disabled.
NOTE: Installing the KeyLock to the USB port on the DVR is required for operating the POS system. Ask your
dealer or installer for details.
Event Logging
Utility Buttons
Full Screen:
disappear, and the monitoring window takes up the full screen in the full-screen
display mode.
anywhere on the screen.
Mode Selection: The record mode is selected when this button is clicked. SmartGuard returns to
view only mode automatically when it is unable to record (for example, when the hard disk is full).
NOTE: The DVR records only in accordance with the recording schedule, which can be set during the system
setup. Before you install the DVR, you need to fully understand the recording schedule. Note also that
clicking this recording mode button only prepares the DVR for recording. In this state, the DVR will follow the
recording schedule.
Manual Alarm Output: In general, the alarm is activated automatically when any related sensor is
activated. However, the user can activate all the alarm output manually by clicking this button
while it is released or deactivate all the alarm output by clicking the button when it is pressed.
button causes the alarm control buttons to display as shown below. The user
If the user disables the alarm during the Alarm setup on the
button causes the POS control buttons to display as shown below. The system
To scroll up and down the list, hold down the left mouse button on the
list and move the cursor up and down, or roll the mouse wheel on the
list.
Click this button to enter the full-screen mode. All of the control buttons
To return from the full-screen mode, click the left mouse button
16-Channel Digital Video Recorder
7
Publicité
