Capture CPT-DVR4132XP Manuel D'utilisation page 118

23.
Click the Set up backup... button, and set up backup information. See the SmartBackup section.
24.
Click the Set up pager... button, and set up pager information. See the SmartPager section.
NOTE: The Set up pager... button will be activated if you set up SmartPager to start in the SmartGuard setup.
25.
Click the Set up Web Server... button, and set up an IIS (Internet Information Services) for the WebGuard
program.
Click the Load... button if you want to load typical settings. Click the Save... button if
you want to save settings. Click the Default button if you want to load default settings.
You can save your changes by clicking the OK button. Selecting Cancel exits the dialog
box without saving the changes.
NOTE: Only the administrator level user can use the Load, Save and Default buttons.
Setting Up Cameras
CAUTION: The recording speed may not be achieved when averaged over all the cameras.
1.
Click the Camera icon.
2.
Click the text field beside Description, and enter a camera title such as "Front Door". You can use either
the actual keyboard or the virtual keyboard.
3.
Move to PTZ, and check the box to enable pan, tilt and zoom functions.
NOTE: To control camera pan, tilt and zoom, you must attach a compatible RX device or dome camera to
the DVR. A list of supported RX devices and dome camera models can be found in the Set up PTZ dialog
box. When controlling a PTZ camera via RS485, an additional RS232 to RS485 converter is required.
16-Channel Digital Video Recorder
11