Capture CPT-DVR4132XP Manuel D'utilisation page 123

User's Manual
8.
Move to Move to preset, and check the box to move the target camera to the preset location when a
selected sensor is activated. Select the camera and preset ID from a drop-down list.
9.
Move to Camera association, and click the camera icon to associate it with a selected sensor. Up to 32
cameras can be selected. Video from associated camera(s) will be recorded when a related sensor is
activated.
NOTE: Selecting 1-16 tab displays camera channels 1 to 16 and selecting 17-32 tab displays 17 to 32.
10.
Move to Alarm association, and click the alarm icon to be associated with a selected sensor. The alarm
will go off when a related sensor is activated.
Setting Up the Motion Detection
1.
Click the Camera icon.
2.
Move to Enable, and check the box to enable motion detection for the selected camera.
3.
Move to High priority, and check the box to give high priority to the target camera. The DVR will follow
the advanced camera setup when the target camera detects motion. See the Setting Up Cameras for
configuring advanced camera setup.
4.
Move to Record Audio, and check the box to record audio when a selected camera detects motion.
Recording audio will be activated when the DVR is recording video. When checking the Record Audio
box, click the Set up Audio... button. Select an audio input type from Microphone or Line-in, and set its
balance and volume in the Recording Control dialog box.
16