Publicité
Les langues disponibles
Les langues disponibles
User's Manual
Auto Sequencing: When this button is clicked, the SmartGuard sequences the cameras in order.
Whenever you click the button, it toggles between On and Off. The switching interval can be set
during the system setup.
Setup: When this button is clicked, a Setup dialog box appears. The dialog box has 11 tabs. See
the following SmartGuard Setup section.
Accessing SmartSearch: Click this button to run the SmartSearch.
SmartGuard Setup
Setting Up the System
1.
Click the Camera icon to enable the camera.
NOTE: Selecting 1-16 tab displays camera channels 1 to 16 and selecting 17-32 tab displays 17 to 32.
2.
Click the System Info... button, and the System Information dialog box appears. The dialog box displays
the information of the installed card, driver, software, hard disk drive, and OS on the system.
3.
Click the text field beside Location. If you have a keyboard attached to your unit, enter a location name
such as "Main Office". If you do not have a keyboard connected to the unit, clicking the keyboard icon
will display a virtual keyboard on which you can type by clicking the letters.
8
Publicité
