Stihl SR 5600 Notice D'emploi page 11

Mounting the Control Handle
3
Pull the ends of the clamp on the
N
control handle (1) apart and push it
over stub of pleated hose (2).
Attach throttle cable to retainer on
N
the hose clamp (3).
Mounting the Extension Tube
1
Rotate the pleated hose (1) as far
N
as stop.
Swing control handle (2) to
N
horizontal position.
SR 5600
1
2
Push the extension tube (3) into the
N
pleated hose (1) as far as it will go.
The metering unit (4) must point in
N
the same direction as the control
handle.
Tighten down the clamp screw (5) to
2
N
secure the control handle – see also
"Adjusting the Control Handle".
4
3
1
5
Fitting the Liquid Hose
1
Slip hose clip over the end of the
N
long hose.
Push the liquid hose (1) onto the
N
container's stub and secure with a
hose clip.
2 1
Secure the liquid hose (1) to the
N
pleated hose with retainer (2).
English
9