Repairs; Safety Procedures - probst RG-20/85-SAFELOCK Instructions D'emploi

Maintenance and care
Gripping width cannot be adjusted at
all or cannot be adjusted correctly
7.3

Repairs

Only persons with the appropriate knowledge and ability are allowed to repair the device.
Before the device is used again, it has to be checked by an expert.
7.4

Safety procedures

•
It is the contractor's responsibility to ensure that the device is checked by an expert in periods of
max. 1 year and all recognized errors are removed (→ DGUV norm 100-500).
•
The corresponding legal regulations and the regulations of the declaration of conformity must be
observed!
•
The expert inspection can also be done by the manufacturer Probst GmbH.
Contact us at: service@probst-handling.de
•
We recommend affixing the inspection sticker "„Sachkundigenprüfung / Expert inspection" in a clearly
visible place (order no.: 2904.0056+Tüv sticker with year number) after the inspection has been done.
The check by an expert must be proved!
Device Year
54500009
•
Foreign bodies on horizontal
shifting tubes
•
Dust or dirt on horizontal shifting
tubes
Date
23 / 24
•
Check for and remove any foreign
bodies on the horizontal shifting
tubes
•
Clean the horizontal shifting tubes
with a high-pressure cleaner and
lubricate if necessary.
Expert Company
GB