Safety; General Safety; Intended Use - Ecolab My Control Manuel D'utilisation

2

Safety

2.1

General Safety

DANGER!
If you assume that safe operation is no longer possible the pump must be put
out of service immediately and be secured against unauthorized use.
This is the case if:
– is visibly damaged
– appears no longer functional
– prolonged storage under unfavorable circumstances has occurred
(carry out function check).
The following notes should be observed:
– Before any work on the electrical section, disconnect power and secure
against being switched on again .
– The safety provisions for handling chemicals must always be observed and,
if applicable, suitable protective clothing must be worn
– Notes in the product data sheet of the used dosing medium has allways to
be observed.
– The installation may only used with the specified supply and control voltage
in the technical data.
2.2

Intended use

WARNING!
Proper use particularly includes the following points:
– The temperature range, the permissible ambient temperature and the
maximum media temperature is permissible only as described in the
"Technical data".
– The operating voltage has to be produced only as described in the
"Technical data".
– The ambient temperature must be between +5 and +45 °C.
Any use which extends beyond or differs from the proper use is considered
improper use.
Proper use also includes compliance with all operating instructions prescribed by the
manufacturer, as well as with all maintenance and servicing conditions.
WARNING!
Danger of misuse!
Improper use may result in dangerous situations:
– Do not use in potentially explosive areas.
– Installation, maintenance and repair work may only be carried out by
trained personnel.
– Wear the appropriate personal protective equipment (PPE) when carrying
out all installation, maintenance and repair work.
13
Safety
417101971 Rev. 2-02.2019