Ecolab My Control Manuel D'utilisation page 171

Temperature & alarms parameters
Fig. 64: Configuration -> Dosing Programm -> Temperature & alarms parameters
Select the Tunnel
Select Tunnel number.
Select Prog number.
For each temperature you have:
n Set point
n Delays
Minimum time
n
n Accept time
Chemical check (push button) if chemical check is "Yes" (green)
n
n T°C control is connected to the product dosing
Available Menue:
Back to Tunnel 1 & 2:
Ä Chapter 7.2.4.4.2 'Tunnel 1 & 2' on page 70.
see chapter
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
73
Software description
417101971 Rev. 2-02.2019