Software Description; General Explanations Of Operating Panel - Screens - Ecolab My Control Manuel D'utilisation

7

Software description

7.1

General explanations of operating panel - screens

On different screens, you have the possibility to use different "sensitive push button".
Along these screens you find the "currently push button" like these.
1
Fig. 15: Navigating options
1 Previous screen
On the bottom line on each screen, you can activate few "push button" depending where
you want to go and if you need to know what is going on.
The "push button" with no text inside is not working (you can't go in this rubric).
When you touch the screen on certain localization, it is coming white. In this case you can
enter values. If the localization data stay in grey you can't enter anything.
Sometimes a numeric keyboard appears.
You can add information. WE number, Program number, pump.
You can see red and green points:
Equipment (You can have 24 equipments):
2 main equipments:
You can see also "scroll up and down with arrow" to select the desired field:
Min: Indicate the minimum value you can enter
Max: Indicate the maximum value you can enter
On each calculate you have the limit value you can enter:
Example:
Deviation for pump: 0-400
Max load: 0-2000
Mini load: 0-2000
TOM signal (1-12): 0-26
Water flush valve (1-12): 0-999
Air flush valve (1-12): 0-999
Green: Running
Deviation pump:
Flush valve:
T.O.M. signal:
Stop condition:
Valve number:
Example:
Flush valve:
Tun stops & eject
conditions:
Water counter:
Temperature:
2 Return to the main menu
Red: Stop
1 . . . 24 = P1 . . . P24
25 = ME1
26 = ME2
1 – 24 + ME1 & ME2
1 – 12
1 – 12
1 – 154
1 – 16
1 – 16
1 – 161
1 – 6
1 – 6
33
Software description
2
417101971 Rev. 2-02.2019