Ecolab My Control Manuel D'utilisation page 167

Temperature alarm parameters
Fig. 59: Configuration -> Dosing Programm -> WE -> Temperature alarm parameters
Select the Program
n Select Program number:
n Step for temperature control: choice the step
n Setpoint: (1/10°C)
n Delay to start control: (s)
n Minimum time accepted below T°C: (s)
n Accept time below temp.: (s)
n Equipment blinked: (option)
Available Menue:
Back to Dosing Program:
Ä Chapter 7.2.4.4 'Dosing Programm' on page 65.
see chapter
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
69
Software description
417101971 Rev. 2-02.2019