Ecolab My Control Manuel D'utilisation page 170

Software description
pH Regulation & alarms parameters
Fig. 62: Configuration -> Dosing Programm -> pH Regulation & alarms parameters
Select the Tunnel
Select Tunnel number:
1. You have to indicate the set point values for each level:
2. After you can choose witch level you shall select for each program.
Available Menue:
Back to Tunnel 1 & 2:
see chapter Ä Chapter 7.2.4.4.2 'Tunnel 1 & 2' on page 70.
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
LF Regulation & alarms parameters
Fig. 63: Configuration -> Dosing Programm -> pH Regulation & alarms parameters
Select the Tunnel
Select Tunnel number:
1. You have to indicate the set point values for each level:
2. After you can choose witch level you shall select for each program.
Available Menue:
Back to Tunnel 1 & 2:
see chapter Ä Chapter 7.2.4.4.2 'Tunnel 1 & 2' on page 70.
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
417101971 Rev. 2-02.2019 72