Ecolab My Control Manuel D'utilisation page 156

Software description
Water counters configuration
Fig. 47: Configuration -> Machine -> Tunnel 1 & 2 -> Counters & Analog values configuration -> Water counters
configuration
Select the Tunnel
Selection of Tunnel number.
Water counters:
n 6 Water counters available
For each you have to select:
The calibration value.
In which compartment number the counter is connected Selection by pushing up and
down arrow.
Available Menue:
One step back:
Ä Chapter 7.2.4.2.2.4 'Counters & Analog values configuration' on page 57.
see chapter
Back to Main Screen:
Ä Chapter 7.2 'System Start - Main Screen' on page 34.
see chapter
417101971 Rev. 2-02.2019 58