Dosage - Ecolab My Control Manuel D'utilisation

7.2.2.1 Wash-Extractor (WE)
Fig. 19: Visualisation of an Wash-Extractor
Select the required WE
Visualisation of a Wash-Extractor.
n
n All grey informations can't be modified.
n If you want modify something, you have to click on "Modify Data" and after this, the
field with a white background can be modified.
n To validate the modified data's, it's necessary to push on the "transmit data" button.
Choice on any push button to go in the request mode.
n
Available Menue:
Back to Visualisation:
see chapter Ä Chapter 7.2.2 'Visualisation' on page 36.

Dosage:

see chapter Ä Chapter 7.2.2.1.1 'Dosage' on page 37.
Back to Main Screen:
see chapter Ä Chapter 7.2 'System Start - Main Screen' on page 34.
7.2.2.1.1 Dosage
Fig. 20: Wash Extractor->Dosage
Select the required WE
Visualisation of the product quantity already dosed in the current program.
Dose number.
Step when the product was dosed.
Equipment concerned.
Dosed quantity.
37
Software description
417101971 Rev. 2-02.2019